STC has the brush generator details

One, STC has the brush generator product overview

ST single phase, STC three phase synchronous generator specification

The company produces ST (single phase), STC (three-phase) generator for nearly 40 years, the annual output generator is about 10,000, the technology is mature, the performance is superior.

Main technical parameter

Rated voltage: 230V (ST), 400VS (STC / 480V (60Hz)

Rated frequency: 50Hz or 60Hz

Power factor: 0.8 (lag)

How to work: continuously

Excitation mode: three harmonics

Insulation level: F level

Protection grade: IP23

Steady state voltage adjustment rate: plus or minus 1.0%

Transient voltage adjustment: plus or minus 10%

Steady state frequency adjustment rate: less than 1%

Frequency stabilization time: no less than 3S

Over current: 3-5le is greater than or equal to 5S

Overload capacity: 1.5 le is greater than 2min

The shell is rolled by steel plate, small size, fast heat and high strength. It has single bearing, double bearing structure and good concentricity.

STC has a brush generator failure check:

1. Oil pressure.

2. Whether the motivation is sufficient.

3. Whether the cooling water and oil temperature is normal.

4. Whether the engine sound is normal.

5. The status of exhaust fumes of the unit.

6. Cooling oil or lubricating oil consumption.

7. Fuel oil, coolant or lubricating oil leakage.